AUNIPSL

EN VI
SS seal

  • AUNIPSL

  • Description

    Representation AUNIPSL is a one-piece polyurethane scraper bar seal with fixed capabilities. * High resistance to gap extrusion.* Exceptionally strong resistance to abrasion.* Insensitive to impact loads and pressure peaks. Application Shock absorberDistributorStandard cylinder Raw materials PU 93PU 96High temperature. PU 96

TECHNICAL DATA

Temperature -30°C/+110°C
Pressure 1.6 MPa
Speed 1 m/s
Medias Lubricated air
Oil-free air
Non-aggressive gases

MATERIALS

PU

Polyurethane is a material that has the elastic properties of rubber. The proportion in its composition (diisocyanate, polyol, chain extender) is determined by its properties. This material is characterised by a strong mechanical resistance, good wear resistance, high elastic modulus, good flexibility and a very good ozone and oxidation resistance.

Chemical resistance Pure aliphatic hydrocarbons (propane, butane)
Mineral oils and greases
Silicone oils and greases
Water up to +50°C
Compatibility issue Ketones, esters, ethers, alcohols and glycols
Hot water, steam, alkalis, amines and acids
Temperature range -30°C/+90°C
-30°C / +110°C with our PUHT

NBR

Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene copolymer. The ACN content can vary between 18% and 50%. While the acrylonitrile content is important, the resistance to oil and fuel is more so. Conversely, the elasticity and compression set are not as good. The NBR has good mechanical properties and good wear resistance. However, its resistance to atmospheric agents and the ozone is relatively low.

Chemical resistance Aliphatic hydrocarbons (propane, butane, petroleum, diesel fuel)
Mineral oils and greases
Fire-resistant fluids (HFA, HFB and HFC)
Diluted acids, low-temperature alkaline and saline solutions
Water (up to +100°C max)
Compatibility issue Ketones, esters, ethers, alcohols and glycols
Hot water, steam, alkalis, amines and acids
Temperature range -30°C/+90°C
-30°C / +110°C with our PUHT

Product

Industry